oepoch industrial technology
OEPOCH INDUSTRIAL TECHNOLOGY
Add to Cart
ISG vertical pipeline single stage centrifugal pump cast iron stainless steel clean water booster pump
Product profile
ISG vertical pipeline pump is an excellent hydraulic model selected by OEPOCH. It adopts the performance parameters of IS type centrifugal pump and is designed and improved on the basis of general vertical pump. In addition, according to the different use temperature and medium, it is derived from hot water, high temperature, corrosion resistant chemical pump, oil pump and other models, with high efficiency, energy saving, quiet, stable and reliable.
Application
This product is suitable for garden spray irrigation, high-rise building pressurized water supply, urban water supply and drainage, industrial circulation transportation, medium remote transportation, fire booster, HVAC refrigeration and heating cycle, bathroom hot water circulation booster..
Working conditions
1, suction pressure ≤ 1Mpa or pump maximum working pressure is less than 1.6Mpa (pump suction plus lift ≤ 1.6Mpa) pump static test pressure is 2.5Mpa, if you need higher working pressure, you need additional customization.
2, the ambient temperature ≤ 40 ° C, the relative humidity is less than 95%.
3. The volume of solid particles in the transport medium does not exceed 0.1% of the unit volume, and the particle size is <0.2 mm. If the media contains fine particles, you need to replace other wear-resistant models.
Features and advantages
1, the pump is a vertical structure, compact and beautiful appearance, the inlet and outlet diameters are consistent and on the same center line, easy to install and maintain.
2. The impeller is directly mounted on the extension shaft of the motor. The axial distance is short and the structure is compact. The radial and axial loads of the pump are effectively balanced, and the operation is stable and the noise is small.
3, mechanical seal using imported titanium alloy seal ring, high temperature resistant wear-resistant hard alloy material, effectively extending the service life
4, installation and maintenance is convenient, no need to dismantle the pipeline, only need to remove the pump base nut to extract all the rotor components.
5, vertical or horizontal cantilever installation can be.
6, the pump can be used in series and parallel according to the flow and head requirements.
Specifications
Product display